The Luxman A-225 is an integrated amplifier produced between 1995 and 1998, designed to deliver high-quality audio performance in a sleek black casing. It features a remote control compatible with Systembus / II technology. The dimensions of the amplifier are 420 mm in width, 135 mm in height, and 340 mm in depth, with a weight of 9.8 kg. The A-225 was originally priced at approximately 650 DM. It boasts a variety of input options, including two phono inputs for moving magnet cartridges, a CD input, a tape play input, and an auxiliary input, all maintaining a standard level of 250 mV at 47 kOhm. There are also outputs for tape rec and headphone use, supporting two pairs of speakers. In terms of audio performance, the amplifier provides a continuous power output of 2 x 85 W at 8 Ohms and 2 x 105 W at 4 Ohms, with a dynamic power output of 2 x 90 W at 8 Ohms and 2 x 125 W at 4 Ohms. It exhibits low total harmonic distortion of just 0.008%, ensuring clean sound output. The frequency response is detailed, with the phono section covering 30 Hz to 20 kHz and the CD, tape, and auxiliary inputs spanning 7 Hz to 100 kHz, both within ± 0.5 dB. Signal-to-noise ratios are impressive, rated at 80 dB for phono inputs and 105 dB for other inputs. Additionally, it features tone control with bass and treble adjustments of ± 10 dB, a loudness function, mute function, and line straight option for uncolored sound production. The A-225 is noted for its build quality and craftsmanship, typical of Luxman products from this era.

The Luxman A-225 is an integrated amplifier produced between 1995 and 1998, designed to deliver high-quality audio performance in a sleek black casing. It features a remote control compatible with Systembus / II technology. The dimensions of the amplifier are 420 mm in width, 135 mm in height, and 340 mm in depth, with a weight of 9.8 kg. The A-225 was originally priced at approximately 650 DM. It boasts a variety of input options, including two phono inputs for moving magnet cartridges, a CD input, a tape play input, and an auxiliary input, all maintaining a standard level of 250 mV at 47 kOhm. There are also outputs for tape rec and headphone use, supporting two pairs of speakers. In terms of audio performance, the amplifier provides a continuous power output of 2 x 85 W at 8 Ohms and 2 x 105 W at 4 Ohms, with a dynamic power output of 2 x 90 W at 8 Ohms and 2 x 125 W at 4 Ohms. It exhibits low total harmonic distortion of just 0.008%, ensuring clean sound output. The frequency response is detailed, with the phono section covering 30 Hz to 20 kHz and the CD, tape, and auxiliary inputs spanning 7 Hz to 100 kHz, both within ± 0.5 dB. Signal-to-noise ratios are impressive, rated at 80 dB for phono inputs and 105 dB for other inputs. Additionally, it features tone control with bass and treble adjustments of ± 10 dB, a loudness function, mute function, and line straight option for uncolored sound production. The A-225 is noted for its build quality and craftsmanship, typical of Luxman products from this era.