The Octave RE 320 stereo power amplifier represents a progressive development in its product line, integrating superior SE technology previously showcased in the Octave V 80 SE integrated amplifier. This technology enhances the amp's stability and linearity, especially notable in its adoption of the modern KT 150 power pentodes. These pentodes facilitate impressive output levels — about 2 x 130 W in push-pull mode, with pulse power soaring above 200 watts, ensuring broad dynamic range and sound integrity across frequencies from 5 Hz to 85 kHz.

Roland Kraft's review in Stereoplay highlights the RE 320's compatibility with a wide array of loudspeakers, attributing its performance to the minimal interference signal level of more than -110 dB which eradicates hum and noise, even with high-efficiency speakers. This makes the RE 320 highly versatile and capable of delivering clean, expansive sound.

In addition to its robust audio performance, the RE 320 is packed with user-centric features to enhance usability and longevity. Fine adjustments of BIAS, a power switch accommodating different tube types, and an innovative ECO mode for energy efficiency are just a few of its practical elements. It also offers flexibility in connectivity with both RCA and XLR inputs and is equipped with a comprehensive power management system that includes soft start electronics to protect the device and prolong its lifespan.

Physically, the RE 320 comes in either silver or black designs, accommodating aesthetic preferences while maintaining a classic look that fits well with various interior designs. Its construction is thoughtful with a user-friendly interface, and dimensions stand at 488 x 210 x 410 mm, weighing 27.6 kg. This amplifier is not only a powerhouse in performance but also a centerpiece in any audiophile's collection, promising reliability and superior sound quality. Such attributes reflect Octave's commitment to unparalleled excellence in audio technology.

Features

  • Eco Mode: Power saving mode
  • Power Selection: Adaptation to alternative power tubes
  • Bias Control: Quiescent current display and setting
  • Protection System:
    • Soft start
    • Protection circuit for amplifier and power tubes
  • Inputs: RCA + XLR selectable

Technical Specifications

  • Output Power at 4 Ohms:
    • High: 2 x 130 W (RMS)
    • Low: 2 x 75 W (RMS)
  • Frequency Response: 25 Hz - 85 kHz / -3 dB at full power
  • Input Resistance:
    • 220 kOhm RCA
    • 20 kOhm XLR
  • Signal-to-Noise Ratio: -110 dB (<100 µV 150 Hz - 15 kHz)
  • Amplification: +28 dB RCA
  • Input Sensitivity:
    • 0.8 V RCA
    • 1.6 V XLR
Loading...

If you have an account, login to post a comment.