The Contour 3.3 is the result of years of painstaking Danish research into all aspects of loudspeaker design, and as such it bears all the hallmarks of Dynaudio's advanced loudspeaker technology.
This three-way, floor-standing speaker is designed for larger rooms where power is vital. It features dual bass drivers incorporating 100 mm (4 inch) woofer voice coils and long throw linear spiders for the ultimate in membrane control. To ensure a perfectly balanced sound in all listening environments, the Contour 3.3 utilizes vented magnet systems on every driver.
The cabinet itself is finished in beautiful wood veneer and comes complete with a spiked MDF base for additional stability and strength. Each woofer is mounted in separate internal chambers to eliminate coloration and increase low frequency accuracy, while bitumen sheets are used internally to dampen resonances.
The Contour 3.3 is undoubtedly a majestic speaker and one that truly deserves its place at the top of the advanced Contour range.
Features
- Status: Discontinued
- Segment: Home
- Series: Contour
- Type: Floorstand
- Sensitivity (dB @ 2.83V/1m): 88
- IEC Power Handling (W): 300
- Rated Impedance (Ohm): 4
- Lower Cutoff (Hz @ +/- 3 dB): 32
- Upper Cutoff (kHz @ +/- 3 dB): 20
- Box Principle: Bass reflex rear ported
- Crossover: 3-way
- Tweeter: 28 mm Soft Dome
- Midrange: 15 cm MSP
- Woofer: 2x20 cm MSP
- Weight (kg): 36.5
- Weight (lbs): 80.5
- Width (mm): 222
- Height (mm): 1187
- Depth (mm): 366
- Width (inches): 8 6/8
- Height (inches): 46 6/8
- Depth (inches): 14 3/8
