NAD is a brand that specializes in high-fidelity audio equipment and electronics.

1700


Two iconic Italian brands, Sonus faber and Maserati, have joined forces to deliver an audio experience as luxurious as a cruise in a GranTurismo. Enter the Amati Folgore: a special edition speaker designed to marry the epitome of sound fidelity with Italian craftsmanship. This collaboration extends beyond just an audio equipment release; it signifies a harmonious blend of innovation, sustainability, and acoustic brilliance.

## Unparalleled Listening Experience

The Amati Folgore represents Sonus faber's unmatched dedication to sound quality. The speaker is a fifth-generation model in the Amati series and is color-coded in Rame Folgore, akin to the Maserati GranTurismo. The intention is not merely to create a speaker but an "unparalleled listening experience," reflecting the grandeur of the Maserati GranTurismo.

## The Genius Behind Materials

The speaker's front panel is made of ECONYL®, a unique material derived from recycled nylon waste. This eco-friendly material has also been used in Maserati's GranTurismo Folgore, marking it the first time ECONYL® is used in a car. The material undergoes an aesthetic transformation, achieving a highly matte surface with a parametric design, all thanks to a specialized laser processing technique.

## Seamless and Refined Aesthetic

The speaker cabinet exhibits the Maserati trident and is dressed in the same GT Folgore finish as the car. The Rame Folgore color is a result of meticulous research on the interaction between light and color. Influenced by modern architecture, especially the Guggenheim Museum in Bilbao, the design evolves, capturing different hues as it interacts with the lighting of the surrounding environment.

## Technical Mastery

But what's a gorgeous speaker without outstanding sound? The Amati Folgore is not just a pretty face; it's a marvel of acoustic engineering. Its 3.5-way speaker system is finely tuned, with a 28mm tweeter, a 150mm midrange, and two 220mm woofers. This produces a frequency response range from 28 Hz to 35,000 Hz, and a nominal impedance of 4 ohms.

## Sustainability Meets Craftsmanship

Sonus faber is known for its commitment to the art of sound engineering. Each speaker undergoes rigorous testing, followed by hand tuning to perfect its natural sound. This commitment to acoustic purity has been carried through into the development of the Amati Folgore Special Edition, creating a listening experience that not only pleases the ear but also respects the planet.

## An Iconic Collaboration

The Amati Folgore represents a unification of Maserati's boldness with Sonus faber's history of technical innovation. The Maserati logo is thoughtfully integrated within Sonus faber’s renowned VOS (Voice of Sonus faber), symbolizing the unity of two iconic Italian brands.

## Conclusion: The Future of High-Quality Audio

While the Amati Folgore is already an incredible milestone, it is just the beginning of an exciting adventure into the future of high-fidelity audio. As both brands continue to push boundaries, audio enthusiasts can anticipate more breathtaking innovations in the future.

A Maserati-inspired high-fidelity floor-standing speaker by Sonus Faber, part of the Amati Folgore collection, showcasing a sleek dark finish.

2308_SF_Immagini_01.jpg

A close-up view of the top corner of a Sonus Faber speaker, featuring a delicately engraved emblem resembling a stylized triad of arrows or sails

2308_SF_Immagini_04-701x1024.jpg

"A detailed view of a Sonus Faber speaker showcasing its intricately designed front panel. Prominently featured is a uniquely shaped mid-range driver with the signature 'SF' logo at its center

2308_SF_Immagini_02-701x1024.jpg

Pair of Sonus Faber Amati Folgore speakers showcasing Italian high-fidelity craftsmanshi

2308_SF_Immagini_03-701x1024.jpg

Maserati Limited Edition Sonus Faber speaker, made in Italy

2308_SF_Immagini_05-701x1024.jpg

Sonus faber speaker detail showcasing the woven pattern and branded emblem.

2308_SF_Immagini_07-701x1024.jpg

2308_SF_Immagini_09.jpg

Italian Elegance and Hi-End: The Sonus Faber & Maserati Amati Folgore

Experience unparalleled luxury and extraordinary sound quality with the special edition Amati Folgore speakers by Sonus faber, in collaboration with Maserati. Explore the craftsmanship, innovation, and sustainable materials that make this speaker a masterpiece of audio engineering.


## Introduction to Room Modes: Understanding the Basics

Room modes are essential in understanding the acoustic characteristics of enclosed spaces. They are specific frequencies where sound waves resonate within a room, creating either amplifications or nulls in the sound field. These resonances are greatly influenced by the room's physical dimensions and shape, affecting sound quality and balance. For anyone looking to achieve optimal acoustics in spaces like studios or home theaters, comprehending room modes is vital. This knowledge forms the basis for effective acoustic treatment and the creation of a balanced audio environment.

## Calculating Room Modes: The Fundamental Formulas

Calculating room modes traditionally starts with considering the room's dimensions. This process involves analyzing the length, width, and height of the space to identify potential frequency issues, particularly at low frequencies where room modes are most prominent. While basic calculations can offer a starting point, they often fall short in more complex or irregularly shaped rooms. In such cases, more sophisticated techniques are required to accurately predict the acoustic behavior, especially when dealing with non-rectangular rooms that do not conform to simple formulas.

## Room Dimension Analysis: How Size Affects Acoustics

The size and shape of a room play a significant role in its acoustic properties. Larger rooms, for example, generally exhibit lower frequency modes, which can be particularly challenging to manage and often require specialized acoustic treatment. Smaller rooms, on the other hand, might contend with higher frequency modes, leading to a completely different set of acoustic issues. The complexity increases further with non-rectangular rooms, as their unique shapes lead to a more complex distribution of modes. Understanding the interplay between a room's dimensions and its acoustic behavior is crucial in addressing sound quality issues and achieving a well-balanced sound environment.

## Practical Steps for Identifying Room Modes: A Step-by-Step Guide

To identify room modes, follow these steps:

1.  **Measure Room Dimensions**: Accurately measure the length, width, and height of the room.
2.  **Use Acoustic Analysis Tools**: Utilize software like Room EQ Wizard (REW) to analyze the room's acoustic response.
3.  **Conduct a Sine Wave Test**: Play sine waves at different frequencies and note where resonances occur.
4.  **Observe Sound Behavior**: Listen for areas in the room where certain frequencies are amplified or diminished.
5.  **Consult Online Calculators**: For rectangular rooms, use online calculators to estimate room modes.

## Addressing Room Modes: Strategies for Acoustic Treatment

To mitigate room modes:

1.  **Install Bass Traps**: Place bass traps in room corners to absorb low-frequency energy.
2.  **Use Broadband Absorbers**: Deploy these across the room to tackle a range of frequencies.
3.  **Consider Diffusers**: Use diffusers to break up sound reflections and distribute sound evenly.
4.  **Fine-Tune with Equalization**: While not a substitute for physical treatment, EQ can help balance out the room's frequency response.
5.  **Seek Professional Advice**: For complex room shapes, consulting an acoustician can provide tailored solutions.

## Summary and Key Takeaways: Mastering Room Mode Identification

Understanding room modes is key to achieving balanced acoustics in any space. By accurately measuring room dimensions and employing acoustic analysis tools, one can identify problematic frequencies. Addressing these issues with appropriate acoustic treatments like bass traps, broadband absorbers, and diffusers can significantly improve sound quality. While equalization can offer some assistance, it is no replacement for physical room treatment. For non-standard room shapes, professional guidance is often necessary to ensure optimal acoustic results.

room acoustics, featuring stylized line art depicting sound waves, a geometric outline

room acoustics.png

Mastering Room Acoustics: Identifying and Treating Room Modes

Discover how to identify and treat room modes for optimal sound quality. This guide offers practical steps and strategies for effective acoustic treatment in any space.


For audio aficionados, the term 'soundstage' is akin to a holy grail. The notion of a three-dimensional sonic space where each instrument and vocal takes its place is an alluring pursuit. But achieving that perfect soundstage is more than just a matter of buying the most expensive gear. It's about the intelligent application of techniques, settings, and positioning.

## The Role of the Subwoofer

A subwoofer's importance in crafting a soundstage is often underestimated. When calibrated carefully, it adds layers to the music, generating a sense of depth and dimensionality. A well-calibrated subwoofer neither overpowers the music nor stays in the background but blends in seamlessly. Modern technologies like Digital Signal Processing (DSP) can offer meticulous calibration options. Time alignment is another overlooked but crucial factor. Synchronizing your subwoofer's output so that it reaches your ears in perfect harmony with your primary speakers can make a significant difference.

## Triangle Equilibrium and Toe-In

The "Triangle Rule" posits that the listener and the two primary speakers should form an equilateral triangle. However, the 'toe-in' factor can add a layer of nuance to this equation. Toe-in refers to the degree to which the speakers are angled toward the listener. More toe-in often results in a more focused, narrow soundstage, while less toe-in can produce a wider, more expansive sonic landscape.

## Role of Room Acoustics

While much of the conversation about soundstage revolves around equipment, room acoustics can be just as critical. Moving your speakers away from the walls can dramatically change the soundstage's depth. Symmetry is another vital aspect; the distance between the speakers and the walls should be uniform. This is where tools like Room EQ Wizard (REW) come into play, allowing you to make data-driven decisions about speaker positioning.

## The Impact of Pre-Amps and Cabling

One often-overlooked aspect of soundstage development is the role of pre-amplifiers and cables. These elements can subtly—or sometimes not-so-subtly—alter the audio output. Changing your pre-amplifier can significantly affect the depth and width of your soundstage, so it's worth exploring this option if you're looking for improvements. Even speaker cables and interconnects can make a difference, so consider experimenting with different types to see what suits your setup best.

## The Importance of Trial and Error

When it comes to fine-tuning your soundstage, experimentation is your best friend. Feel free to move your speakers around, tweak the settings on your subwoofer, and even change your seating position. Using familiar music tracks to gauge these adjustments is a tried and true method for gauging their effectiveness.

## Measurements and Tools

While your ears are indeed the final judge, having tools and software to measure your setup can add a layer of objectivity to the fine-tuning process. REW or similar room measurement software can offer insights into room acoustics and speaker performance, allowing you to adjust based on empirical data.

## Conclusion

Fine-tuning a soundstage is a blend of art and science. While there is no one-size-fits-all formula, the guidelines and tips in this article should provide you with a roadmap to enhance your audio experience. Remember, every change you make should aim to maximize your immersion and enjoyment of the music. So start experimenting and make that ideal soundstage a reality!

the essence of a soundstage dedicated purely to acoustic performances, featuring a selection of musical instruments

the essence of a soundstage.png

The Art of Fine-Tuning Your Soundstage

Discover the science and art behind creating the perfect soundstage for your audio setup. Explore techniques, role of equipment, and expert insights to fine-tune your sound experience.

1700

by NAD

Start a thread

Interesting articles

Italian Elegance and Hi-End: The Sonus Faber & Maserati Amati Folgore

Mastering Room Acoustics: Identifying and Treating Room Modes

The Art of Fine-Tuning Your Soundstage