Thorens is a brand that specializes in high-quality turntables and vinyl-related equipment.

Thorens

STA 980


### Understanding High-End Audio: The 2.0 Channel Foundation

**Introduction to High-End Audio and the 2.0 Channel System**

High-end audio systems are revered for their ability to reproduce sound with exceptional clarity, depth, and fidelity. At the heart of many such systems is the 2.0 channel setup, which consists of two speakers - a left and a right. This configuration is a staple in the high-end audio world due to its simplicity and effectiveness in delivering a pure and uncolored soundstage.

**The Philosophy Behind 2.0 Channels in High-End Systems**

The preference for 2.0 channels in high-end setups is rooted in the pursuit of audio purity. With only two channels, the audio path is more direct, reducing the potential for signal degradation or interference that might occur in more complex setups. This simplicity ensures that the sound is as close to the original recording as possible, a key goal for audiophiles.

**Technical Aspects of 2.0 Systems**

In a 2.0 system, each speaker is responsible for reproducing a full range of frequencies. High-end speakers are typically designed with this in mind, featuring advanced drivers and enclosures that can handle low, mid, and high frequencies effectively. The absence of a subwoofer in these setups is not seen as a limitation but as a design choice that emphasizes precision over sheer power.

**The Role of Amplifiers in 2.0 Setups**

The amplifier in a 2.0 system is more than just a power source; it's the heart of the audio experience. High-end amplifiers are not merely about amplifying sound; they're about preserving the nuances and details of the audio. In 2.0 setups, such as those crafted by Pass Labs and McIntosh, the amplifiers are fine-tuned to deliver an unadulterated audio signal. This precision ensures that the stereo output retains the original quality of the recording, reflecting the artist's intent with utmost fidelity.

### The Role of Subwoofers: Introducing the 2.1 Setup

**The Basics of the 2.1 Setup**

Moving from a 2.0 to a 2.1 setup involves adding a subwoofer to the existing two speakers. This configuration aims to enhance the overall sound quality by reproducing the lower frequencies more effectively than most standard speakers can achieve. The subwoofer takes over the task of delivering deep bass, allowing the main speakers to focus on mid and high frequencies.

**Why Add a Subwoofer?**

The addition of a subwoofer is often seen as a logical step to achieve a more complete sound. In the discussion shared, audiophiles highlighted that even high-end speakers might struggle with the lowest frequencies. A subwoofer can fill this gap, ensuring that the audio spectrum is fully represented. This addition can lead to a more accurate and immersive listening experience, particularly in genres of music where bass plays a prominent role.

**Integrating a Subwoofer in High-End Systems**

Integrating a subwoofer into a high-end system requires careful consideration. Most high-end pre-amps, have a sub output, making it technically feasible to add a subwoofer. The subwoofer typically has its own amplifier, so it doesn’t require power from the main amplifier. This separation allows for more control over the bass levels and the overall balance of the sound.

**Subwoofers: Not Just for Home Theater**

There's a common misconception that subwoofers are primarily for home theater systems. However, as the conversation reveals, subwoofers have a place in music reproduction too. They aren’t just about adding power to the sound; they're about enriching the listening experience by accurately reproducing the full range of sound as intended in the recording.

### Evolving to 2.2: The Dual Subwoofer Approach

**Introduction to the 2.2 Setup**

The evolution from a 2.1 to a 2.2 system marks a significant step in enhancing the audio experience. In a 2.2 configuration, two subwoofers are paired with the traditional stereo speakers. This setup is gaining popularity among audiophiles for its ability to create a more balanced and immersive soundstage.

**Why Two Subwoofers?**

Adding two subwoofers instead of one can dramatically improve the distribution of bass frequencies within a room. The primary advantage is the reduction of bass 'dead spots' and the creation of a more uniform bass response throughout the listening area. This is particularly important in unevenly shaped rooms or spaces with challenging acoustics.

**Optimal Placement of Dual Subwoofers**

The placement of subwoofers in a 2.2 setup is critical. Contrary to the common practice of placing subwoofers next to the main speakers, audiophiles recommend experimenting with different locations in the room. The goal is to achieve a smooth bass response across the listening area. Techniques like distributed bass arrays are mentioned as effective methods to achieve this.

**Integrating Subwoofers with Main Speakers**

Integrating two subwoofers with the main speakers requires more than just physical placement. The conversation highlighted the importance of tuning the subwoofers to work in harmony with the main speakers. This involves adjusting crossover frequencies, phase settings, and volume levels to ensure a cohesive sound that doesn’t overpower or undermine the main speakers.

**Benefits of a 2.2 System**

The 2.2 system is not just about adding more bass; it's about enhancing the overall listening experience. Dual subwoofers can provide a more precise and controlled bass response, which is particularly beneficial for music genres with complex bass lines or deep, resonant tones. This setup can reveal subtleties in music that might be missed in a 2.0 or 2.1 system.

### Subwoofers and Vinyl Playback: An Analog Dilemma

**The Vinyl Resurgence and High-End Audio**

The resurgence of vinyl has brought a renewed focus on the analog listening experience. Vinyl enthusiasts often prefer setups that honor the warm, natural sound of analog recordings. However, integrating subwoofers into these systems presents unique challenges.

**Analog Purity vs. Bass Enhancement**

The primary concern in adding a subwoofer to a vinyl setup is maintaining the integrity of the analog signal. Vinyl listeners value the untouched, pure sound of their records. Introducing a subwoofer, especially in a digital format, can be seen as a compromise to this purity. It emphasizes finding a balance between enhancing bass frequencies and preserving the analog character of vinyl.

**Integrating Subwoofers in Vinyl Systems**

For vinyl systems, the integration of subwoofers needs to be handled delicately. The use of high-level connections, as suggested by some audiophiles, is a method to connect subwoofers to vinyl setups without converting the signal to digital. This approach can maintain the analog integrity while benefiting from the subwoofer’s bass extension.

**Choosing the Right Subwoofer for Vinyl**

Not all subwoofers are suited for vinyl playback. Selecting a subwoofer that complements the nuances of analog sound is crucial. Audiophiles recommend looking for subwoofers with a natural, uncolored sound that can accurately reproduce the lower frequencies without overwhelming the inherent qualities of vinyl recordings.

### High-End Amplifiers: Design Philosophies and Subwoofer Compatibility

**The Essence of High-End Amplifier Design**

High-end amplifiers represent a pinnacle of audio engineering, where the focus extends beyond mere functionality to achieving sonic perfection. Brands like Pass Labs and McIntosh embody this pursuit through their commitment to sonic clarity and detail. Their design philosophy steers away from adding complexity, like dedicated subwoofer channels, to maintain a pure, uncolored audio pathway. This approach underlines the belief that in high-end audio, less can often be more, prioritizing the quality of each component to ensure an exceptional listening experience.

**Why High-End Amplifiers Often Lack Dedicated Subwoofer Channels**

High-end amplifiers typically do not include dedicated subwoofer outputs because their design is rooted in traditional stereo audio principles. The aim is to deliver a pristine, uncolored sound, and the addition of a subwoofer channel is often seen as a deviation from this goal. However, this doesn't mean they are incompatible with subwoofers; it simply implies a different approach to integration.

**Integrating Subwoofers with High-End Amplifiers**

Integrating a subwoofer with these amplifiers usually involves using the pre-amp outputs or speaker-level outputs. The discussion suggests that most pre-amps have a sub output, and many subwoofers come with their own amplifiers, making this integration feasible. The key is to ensure that the subwoofer is complementing, not overpowering, the main speakers.

**Strategies for Subwoofer Integration**

To effectively integrate a subwoofer into a high-end 2.0 system, it's crucial to pay attention to aspects like crossover settings, phase alignment, and volume balancing. This ensures that the subwoofer works in harmony with the main speakers, enhancing the bass response without compromising the overall sound quality.

### Optimizing Your High-End System with Subwoofers

**Understanding Subwoofer Placement and Calibration**

Proper placement and calibration are essential for integrating subwoofers into a high-end audio system. The placement of subwoofers should be experimented with for optimal bass response. This might involve moving them around the room and adjusting settings until the bass feels evenly distributed and integrated with the speakers.

**The Benefits of Dual Subwoofers in High-End Systems**

Adding two subwoofers (a 2.2 setup) can address room-related bass inconsistencies and enhance the overall listening experience. The key is to ensure that they are properly positioned and calibrated so that they work together to provide a smooth and even bass response throughout the listening area.

**Subwoofer Selection for High-End Systems**

Choosing the right subwoofer for a high-end system is crucial. The subwoofer should be of high quality, capable of delivering clean, tight bass that complements the main speakers. It should match the system not just in terms of power but also in sonic character.

**Calibrating Subwoofers for Vinyl Playback**

For vinyl enthusiasts, calibration becomes even more critical. The goal is to ensure that the subwoofers enhance the bass frequencies while retaining the analog warmth and richness of vinyl. This might involve fine-tuning crossover frequencies and volumes to ensure a seamless blend with the analog sound.

**Conclusion**

Adding subwoofers to a high-end audio system, whether it's a 2.1 or a 2.2 setup, requires thoughtful consideration and careful setup. The goal is to enhance the listening experience by extending the bass response without detracting from the purity and integrity of the high-end system. With the right approach, subwoofers can be a valuable addition to any high-end audio setup.

high-end audio setup featuring a single subwoofer alongside premium speakers and an amplifier.png

Deciding on Subwoofer Use in High-End Audio Systems 2.1 or 2.2 Setup

Discover how adding a subwoofer in a 2.1 setup can enhance your audio experience with deeper, richer bass.

We will discuss:

-   The collaboration between Sonos and Sonance for an innovative 8-inch in-ceiling speaker.
-   How the larger size enhances sound quality and bass in your home.
-   Features like Trueplay tuning for optimal room acoustics and a sleek, paintable design.
-   The integration of these speakers into the wider Sonos ecosystem for a seamless audio experience.

Interesting? Continue reading ...

---

**Here's What's New with Sonos' Latest Audio Venture**

So, Sonos has been up to something interesting lately. They've joined forces with Sonance, known for their high-quality speakers, to roll out a new 8-inch in-ceiling speaker. It's a step up from their usual 6.5-inch models, and it seems like they're really trying to make a mark in the home audio world.

**Bigger Size, Better Sound?**

The first thing you'll notice about these speakers is their size. They're 8 inches, which is pretty large for in-ceiling speakers. But why does size matter here? Well, larger speakers typically give you better bass, and who doesn't like a bit more depth to their music? It's not just about shaking the room, but about getting a fuller sound, especially if you've got a big space to fill.

The tech inside these speakers is pretty neat too. They've got this enlarged woofer and a special driver that's all about improving mid-range sounds. Plus, there's a tweeter for those higher notes. Basically, Sonos and Sonance are trying to cover all bases to make sure whatever you're listening to sounds great.

**Smart Tech and Room-Friendly Sound**

Sonos is known for its smart features, and these speakers fit right into that. They work with the Sonos system, especially if you have the Sonos Amp. This means you can control them from your phone, link them up with other Sonos speakers in your house, and even use AirPlay 2. They've also got this Trueplay tuning feature, where the speakers adjust their output to sound good in whatever room they're in.

Design-wise, Sonos has kept it sleek. The speakers can blend into your ceiling, and you can even paint over the grill to match it exactly. This is great if you're not a fan of techy-looking gadgets cluttering your space.

**Price and Who They're For**

At 1,099 Euros a pair, these speakers aren't exactly cheap. But they're aiming at the higher end of the market. If you're serious about your home audio and want something that looks good and sounds even better, these could be a great fit.

**Overall Take**

With this new launch, Sonos and Sonance seem to be targeting those who want quality sound without their speakers sticking out like a sore thumb. The blend of size, sound quality, and smart features makes these speakers an interesting option. If you're in the process of upgrading your home audio and are willing to invest in something that's built to impress, these new Sonos speakers could be worth a look.

SONOS_SONANCE_8in_Ceiling_3q_TwoPairs_Amp_SbS_8-inch_001-copy.jpg

Sonos Teams Up with Sonance for Bigger and Better In-Ceiling Speakers

Sonos is an audio brand that specializes in wireless home sound systems. Their products include speakers, soundbars, and audio components that can be connected and controlled via a mobile app.

Sonos

Discover Sonos' Trueplay tuning – an intelligent feature that adapts sound to your room's acoustics


Victrola, a name we usually associate with affordable record players, has rolled out the Stream Sapphire, a turntable that's hitting the shelves at $1,500. This isn't just a new product; it's a whole new direction for a brand that's been more about nostalgia and wallet-friendly prices than high-tech luxury.

#### Stepping Up to the High-End Game

The Stream Sapphire is a bit of a head-turner for Victrola. Known for making turntables that won't break the bank, they're now stepping into a league where the stakes, and prices, are a lot higher. This model comes with some pretty serious kit, like the Ortofon 2M Blue cartridge, and a look that’s a notch above, with its walnut finish. Plus, it's keeping up with the times, offering features like wireless connectivity with Sonos and other modern systems – a nod to folks who love their vinyl but live in a wireless world.

#### The Word on the Street

Since Victrola announced the Stream Sapphire, people are talking, and opinions are all over the place. Some are genuinely curious to see what Victrola can do when they're not holding back on cost. The design and tech specs have caught the eye of many, suggesting that maybe there’s more to this than just a price tag surprise.

But, let's be real – there's also a fair share of eyebrow-raising. Victrola's been the go-to for entry-level turntables, so jumping into the deep end with a $1,500 model is a big leap. It’s stirred up debates about whether this turntable is really up to par with other high-end gear, especially considering Victrola’s usual spot in the market.

#### So, What’s the Deal?

At the end of the day, the Stream Sapphire is kind of a wild card. It's a mix of old-school vinyl charm and the latest in audio tech. It’s not just about whether people are going to buy this turntable; it’s also about whether they're ready to see Victrola in a whole new light. The Stream Sapphire isn't just testing the waters with its features and fancy design – it's challenging how we see a brand that's been a staple in a very different part of the market. As it gears up to hit the stores, it's going to be interesting to see if it can find its groove among both the vinyl purists and the tech-savvy crowd.

Screenshot 2024-01-19 at 13.08.00.png

Victrola Sapphire Takes Vinyl Wireless with Sonos Integration

Victrola is a brand that specializes in audio products including turntables, record players, and Bluetooth speakers.

Victrola

Victrola expands horizons with Stream Sapphire, supporting Roon and UPnP for versatile audio streaming

STA 980

by Thorens

Start a thread

Interesting articles

Deciding on Subwoofer Use in High-End Audio Systems 2.1 or 2.2 Setup

Sonos Teams Up with Sonance for Bigger and Better In-Ceiling Speakers

Victrola Sapphire Takes Vinyl Wireless with Sonos Integration