Just when you think the audio world couldn't surprise you anymore, ATOHM unveils their latest gem from France: the Sirocco 2.24 floorstanding speakers. An evolution of the Sirocco series, these speakers step up with a refined 2.5-way configuration, featuring a pair of C150 bass drivers that set them apart from the previous Sirocco 1.24 model.

Standing at 990 x 260 x 220 mm, the Sirocco 2.24 commands attention without dominating your space. They're designed to cover a frequency range from 40 Hz to 25,000 Hz, ensuring a full-spectrum audio experience that captures every subtle detail and powerful low end.

With a sensitivity of 88 dB and a nominal impedance of 6 ohms (dropping to a minimum of 3.5 ohms), these speakers are ready to pair with power amplifiers ranging from 50 to 300 watts. This flexibility makes them a solid match for a variety of setups, whether you're upgrading your current system or starting fresh.

Aesthetics matter just as much as sound, and ATOHM offers the Sirocco 2.24 in three stylish finishes: crisp white, light oak, and rich walnut. This allows the speakers to not only perform exceptionally but also complement your listening environment.

For those serious about elevating their audio journey, the Sirocco 2.24 is priced at 2,790 euros per pair. It's a compelling option for anyone looking to blend high-fidelity sound with elegant design.

large_Screenshot 2025-02-04 at 09.42.43.png

medium_Screenshot 2025-02-04 at 09.42.43.png

small_Screenshot 2025-02-04 at 09.42.43.png

thumbnail_Screenshot 2025-02-04 at 09.42.43.png

Screenshot 2025-02-04 at 09.42.43.png

ATOHM Launches Sirocco 2.24: Enhanced Floorstanding Speakers with Superior Sound Quality


When it comes to setting up audio equipment in your home, the type of cables you use can be just as critical as the hardware itself. One common question for DIY enthusiasts is whether it’s better to run a long RCA cable from the source to an amp located next to the speakers or use a long speaker cable from the amp to the speakers.

## Signal Susceptibility and Interference

There's a general consensus that speaker wire signals are less susceptible to interference compared to RCA cables. This can be especially significant if you are running the cables behind walls where they might be exposed to electromagnetic noise from other electrical lines.

## Gauge and Material Matters

When opting for long runs of speaker cables, it's crucial to choose a suitable gauge and material. Oxygen-free copper is often recommended over aluminum-clad copper for better signal quality. The thickness (gauge) of the wire can also play a role; a thicker wire may be more effective for longer runs, reducing signal loss and potential degradation of audio quality.

## The Balanced Option

Some argue that using balanced cables like XLR instead of RCA is the "correct" way to tackle this problem. However, it's important to note that balanced connections require compatible outputs on the device, something not common on consumer-level devices. Even though balanced cables offer significant advantages in minimizing interference and delivering a clearer signal over longer distances, they might not be applicable to all setups.

## Alternatives and DIY Solutions

For those who love tinkering, DIY solutions such as using baluns for long cable runs have been reported to be effective. These can run over distances as long as 300 ft with minimal signal drop-off and noise reduction. Ethernet to RCA boxes using audio-grade transformers have also been used successfully. However, the performance of such DIY solutions in an audiophile system might vary and warrant careful consideration.

## Audio Roll-offs and Industry Insights

Some professionals in the broadcast sector have noted that long runs of RCA cables could lead to high-frequency roll-offs, affecting the sound quality. On the other hand, they've successfully run speaker cables for approximately 100 feet without any discernible degradation in sound quality.

## The Bottom Line

If you're dealing with a domestic setup, and you don't have the option for balanced outputs, the safe bet is to go with a long run of good-quality speaker wire. This approach seems to be the best compromise between maintaining sound quality and minimizing interference, especially if the amp is placed close to the source. If the Wife Approval Factor is crucial, this method also allows for a more discreet setup. However, if your system allows for balanced connections and you're after the pinnacle of audio fidelity, XLR cables would be the recommended path.

raw high-fidelity speaker cable without any connectors. The cable should display a detailed braided sheath

raw high-fidelity speaker cable.png

RCA vs Speaker Cables: The Best Choice for Long Runs in Home Audio

Choosing the right cable can be a game-changer for your home audio setup. Explore the debate between RCA and speaker cables for long distances.


In the world of high-fidelity audio, every detail matters — from the intricacy of a speaker's design to the subtle tonal qualities that differentiate one audio setup from another. For audiophiles and enthusiasts, this means that a casual approach to buying equipment is rarely enough. So, how do you ensure that you're making the most informed decision? The answer lies in a rigorous auditioning process, both in-store and at home.

This comprehensive guide aims to be your go-to resource for auditioning hi-fi equipment effectively. You'll learn why auditioning is a crucial step in the buying process, the advantages and disadvantages of in-store vs. at-home auditioning, and actionable tips to make each experience meaningful. By the time you've finished reading, you'll be fully equipped to navigate the intricate, rewarding process of selecting the perfect hi-fi setup for your specific needs.

## Why Auditioning Matters

In an age where online shopping has become the norm for everything from groceries to gadgets, you might wonder why a hands-on, ears-on approach to buying hi-fi equipment is necessary. After all, aren't product specifications, user reviews, and expert opinions sufficient for making an informed decision? While these elements can be helpful, nothing replaces the tangible experience of auditioning hi-fi equipment for yourself. In this chapter, we'll explore why in-store and at-home auditions are indispensable in your quest for audio perfection and how these two approaches complement each other.

#### Benefits of In-Store Auditions

1.  **Expert Guidance**: In specialized hi-fi stores, you'll often find knowledgeable staff who can provide valuable insights and guide you through the myriad options available.
    
2.  **Immediate Comparisons**: Many stores offer multiple setups in one location, allowing you to directly compare different brands, models, and configurations.
    
3.  **Hands-on Experience**: Being able to touch the equipment, understand its build quality, and get a feel for its user interface can greatly inform your buying decision.
    
4.  **No Shipping Hassles**: Buying in-store means you can take your chosen equipment home the same day, without worrying about shipping delays or damages.
    

#### Benefits of At-Home Auditions

1.  **Real-World Testing**: Your home isn't a perfectly designed sound chamber. Auditioning at home lets you test equipment in the same environment where you'll actually be using it.
    
2.  **Extended Listening**: In a store, you might get a 20-minute demo, but at home, you can spend hours or even days getting to know the equipment.
    
3.  **Personalized Experience**: At home, you can listen to your own playlist, adjust settings as you see fit, and generally get a more personalized audition experience.
    
4.  **Ease of Return**: Many online vendors and even some physical stores offer generous return policies for at-home trials, making it a low-risk proposition.
    

#### How Each Approach Complements the Other

While both in-store and at-home auditions have their unique advantages, using them in tandem can offer a holistic evaluation process that's greater than the sum of its parts.

-   **Initial Filtering**: An in-store audition can help you immediately rule out certain options, making your at-home trials more focused and efficient.
    
-   **Double-Check**: At-home auditions provide an opportunity to re-evaluate your in-store impressions, ensuring that you're completely satisfied with your choice.
    
-   **Contextual Understanding**: Being able to experience how equipment performs in both a controlled (in-store) and real-world (at-home) setting can provide a balanced understanding that one alone cannot.
    

In summary, auditioning isn't just a luxury or an indulgence; it's an essential component in the hi-fi equipment buying process. By making the most of both in-store and at-home auditions, you can be confident that you're making a choice that will deliver the acoustic excellence you seek.

## In-Store Auditions

When it comes to auditioning hi-fi equipment, not all stores are created equal. From big-box retailers to specialized hi-fi shops, the type of store can drastically affect your auditioning experience. But what really makes in-store auditioning so significant? Let's dive in to explore the nuances.

#### Chain Stores vs. Specialized Shops

1.  **Product Range**: Chain stores usually offer a broad range of products but might lack the specialized, high-end options available in a dedicated hi-fi shop.
    
2.  **Staff Knowledge**: Employees in specialized stores are more likely to be passionate audiophiles with a deep understanding of the products, whereas chain store staff may not be as knowledgeable.
    
3.  **Customization**: Specialized stores often provide more bespoke services, like custom setups, than chain stores.
    
4.  **Price**: While chain stores might offer competitive pricing and frequent promotions, specialized shops might offer bundled deals with cables, stands, or other accessories that provide a better overall value.
    

#### The Significance of In-Store Experiences

1.  **Immediate Feedback**: Nothing can substitute the real-time evaluation you get in an in-store audition. Whether it's the texture of a bass note or the shimmer of a cymbal, you'll know it when you hear it.
    
2.  **Room Acoustics**: Although not identical to your home environment, the acoustic spaces in specialized stores are often better designed than those in chain stores, allowing for a more accurate assessment.
    
3.  **Community**: Visiting a specialized store can connect you with other audiophiles and experts, providing insights you may not have considered.
    
4.  **The Trust Factor**: Being able to speak directly to staff, get live demonstrations, and see the equipment in action can instill a level of trust that online interactions often can't match.
    
5.  **The 'Wow' Moment**: Sometimes, hearing a piece of equipment reveal new nuances in a well-known track can be a revelatory experience. These 'wow' moments are hard to quantify but can be pivotal in your buying decision.
    

By understanding the pros and cons of chain stores and specialized shops, you can tailor your in-store auditions to suit your needs. Moreover, recognizing the significant advantages of auditioning in a physical store can encourage you to make the extra effort to visit one.

## Talking to Salespeople In-Store

Interacting with salespeople is an integral part of the in-store auditioning process. The right questions can unearth a treasure trove of information, while recognizing red flags can save you from making a purchase you may regret later. Let's delve into how to navigate these conversations effectively.

#### Questions to Ask

1.  **How Does This Model Compare to Others?**: This question can reveal the salesperson's knowledge and whether they have a genuine understanding of what makes each model unique.
    
2.  **What's the Return Policy?**: This is crucial. Always know your options in case the equipment doesn't meet your expectations at home.
    
3.  **Can This Be Paired with X Equipment?**: If you already have some components, it’s essential to know how the new equipment will fit into your existing setup.
    
4.  **Do You Have Any Bundled Deals or Upcoming Sales?**: Sometimes, stores offer promotions that aren’t heavily advertised. It doesn't hurt to ask.
    
5.  **What Cables/Accessories Do You Recommend?**: While some may view this as an upsell technique, different cables and accessories can alter your experience.
    
6.  **Can I Listen to This in a Different Room Setup?**: This question can provide insight into how the equipment performs in various acoustic environments.
    

#### Red Flags to Look Out For

1.  **Pushiness**: A salesperson who is overly aggressive about making a sale is often a red flag. It may indicate a lack of genuine concern for your needs.
    
2.  **Lack of Knowledge**: If the salesperson can't answer basic questions about the equipment, it's a sign that you might not be getting the best advice.
    
3.  **Steering Toward Higher-Priced Items**: Be cautious if the salesperson ignores your budget and consistently directs you towards more expensive options.
    
4.  **Unwillingness to Demo**: If they're reluctant to set up a demonstration, especially of lower-priced items, take it as a warning sign.
    
5.  **Disregarding Your Preferences**: If the salesperson dismisses your preferences or questions, they are likely not looking out for your best interests.
    
6.  **Too Good to Be True**: If a deal sounds too good to be true, it probably is. Always check the return policy and warranty in such cases.
    

Arming yourself with the right questions and being vigilant for red flags can make your interaction with salespeople more productive and less stressful. A skilled and honest salesperson can be your ally in making an informed choice, guiding you toward equipment that truly meets your needs.

## The Nuts and Bolts of In-Store Auditioning

Once you've chosen a store and engaged with the salespeople, you're ready for the actual auditioning. This chapter will guide you on what tracks to use for your auditions and the technical settings you need to consider to make an informed decision.

#### Suggested Tracks and Audio Clips

1.  **Dynamic Range**: Tracks with a good dynamic range can help you understand how well the equipment handles highs and lows. Classical music tracks are usually good for this.
    
2.  **Vocal Clarity**: Choose a track that features strong vocals to see how well the speakers or headphones present the human voice. Jazz and acoustic tracks are often good for this.
    
3.  **Instrumental**: Select an instrumental track to understand how well the equipment handles complexity and nuance.
    
4.  **Bass and Beat**: Hip-hop or electronic tracks can help you assess the low-end capabilities of the equipment.
    
5.  **Your Go-To Music**: Always include some of your favorite tracks. After all, you'll want equipment that makes your preferred music sound great.
    

#### Technical Settings to Consider

1.  **Volume Level**: Start with a moderate volume setting. Too high or too low can distort your perceptions. Aim for a volume level where speech sounds natural.
    
2.  **Equalization (EQ)**: If possible, turn off any EQ settings. You want to hear the equipment’s natural sound profile.
    
3.  **Placement**: The placement of speakers in relation to walls and the floor can have a huge impact. If possible, try to mimic your home setup in the store.
    
4.  **Source Quality**: Make sure to use high-quality audio files or streaming services. A low-quality source can make even the best equipment sound terrible.
    
5.  **AB Comparisons**: Try to switch between different models quickly for an A/B comparison, but make sure the volume levels are matched for a fair assessment.
    
6.  **Acoustic Environment**: Some stores have different rooms designed to mimic various home settings. Take advantage of these to see how equipment performs in different acoustic conditions.
    

By focusing on both the tracks you play and the settings you use, you can glean a lot about a piece of equipment's performance, strengths, and weaknesses. This will allow you to make an educated decision that you'll be happy with in the long term.

## Taking it Home: Why and How

In this chapter, we'll talk about the essential practice of auditioning equipment in your own home and how to navigate the logistical aspects like return policies and setup.

#### The Importance of Auditioning Equipment in Your Own Acoustic Space

1.  **Room Acoustics**: No two rooms are the same. The shape, size, and even furniture can affect how audio sounds in your space. An in-home trial gives you an authentic experience.
    
2.  **Personal Comfort**: Using equipment in the comfort of your home can also help you understand how user-friendly the controls are, the weight and comfort of headphones, and other ergonomic aspects.
    
3.  **Long-Listening Tests**: At home, you can conduct more extended listening tests than you could in a store, which can help you identify any nuances or issues that may not be immediately apparent.
    
4.  **Compatibility**: If you already have some audio components, testing new equipment at home will show you how well it integrates with your existing setup.
    

#### Logistics: Return Policies, Setup, etc.

1.  **Return Policies**: Always check the return policy before making a purchase, especially if you're buying high-end equipment. Look for a minimum 30-day return policy and make sure to keep all original packaging.
    
2.  **Setup**: When you bring the equipment home, take the time to set it up properly, mimicking your final setup as closely as possible.
    
3.  **Break-In Period**: Some audio equipment, particularly speakers and headphones, require a break-in period. Make sure to account for this in your auditioning.
    
4.  **Documentation**: Keep track of what you like and don't like during your in-home trial. This will make it easier to make a final decision and to set up the equipment permanently once you decide to keep it.
    
5.  **Shipping and Restocking Fees**: Be aware that some stores charge a restocking fee or don't cover return shipping. Factor these potential costs into your decision-making process.
    

By understanding the importance of at-home trials and preparing for the logistical aspects, you can make a far more informed decision about your audio equipment.

## At-Home Audition Checklist

In this chapter, we will outline a step-by-step checklist for setting up and conducting an at-home audition. The more prepared you are, the more successful your audition will be.

#### How to Set Up Your Home for Testing

1.  **Designate the Listening Area**: Choose where you will place your equipment for the audition. It should be as close as possible to where it will ultimately reside.
    
2.  **Acoustic Preparations**: If possible, use any acoustic treatments you have like diffusers, bass traps, or acoustic panels.
    
3.  **Proper Wiring and Connections**: Make sure you have the right cables and that everything is properly connected. The wrong cable can distort your testing.
    
4.  **Leveling and Positioning**: If auditioning speakers, ensure they are properly leveled and positioned for optimal sound staging.
    
5.  **Controlled Volume**: Start at a lower volume and gradually increase it to different levels to examine performance.
    
6.  **Neutral Settings**: Initially, keep any EQ settings neutral to get a baseline performance.
    

#### Key Aspects to Evaluate

1.  **Sound Quality**: Listen for clarity, depth, and richness in the sound. Pay attention to how the equipment handles various frequencies.
    
2.  **Sound Stage and Imaging**: Assess how well the audio equipment creates a multi-dimensional sound stage. Are you able to pinpoint where each instrument is coming from?
    
3.  **Bass and Treble**: How well does the equipment handle low and high frequencies? Is the bass muddy or clear? Is the treble sharp or smooth?
    
4.  **Detail and Resolution**: Can you hear subtle details in the music? This often separates good equipment from great equipment.
    
5.  **Ease of Use**: Assess how user-friendly the system is. Are the controls intuitive? Is it easy to change settings or inputs?
    
6.  **Integration**: How well does the new equipment integrate with your existing setup? Are there any compatibility issues?
    
7.  **Fatigue**: During longer listening sessions, do you experience any ear fatigue or discomfort?
    
8.  **Visual Appeal**: Although secondary to performance, consider how well the equipment fits with your home decor if it's going to be a permanent fixture.
    
9.  **Durability and Build**: Check the quality of materials and build. Does it feel like it will last?
    

By diligently setting up your home for an audition and methodically evaluating key performance aspects, you'll be far more likely to make a purchase that you’re pleased with in the long run.

## A Decision Framework

Making the right choice in audio equipment can be challenging, given the array of options and the subtleties in performance that separate one piece from another. In this chapter, we'll provide you with a framework to integrate the knowledge you've accumulated from both in-store and at-home auditions, guiding you towards making your final choice.

#### Integrating Insights from Both In-Store and At-Home Auditions

1.  **Compile Data**: Make a comprehensive list of pros and cons based on both types of auditions. Include everything from sound quality to aesthetics.
    
2.  **Weigh the Factors**: Not all aspects are created equal. Sound quality may be much more important to you than ease of use, or vice versa. Assign weights to the various factors based on your priorities.
    
3.  **Score Calculation**: Use the weights to calculate an overall score for each piece of equipment. This helps make an objective decision.
    
4.  **Environmental Context**: How did the equipment perform in both the store setting and your home? Were there marked differences? This will give you an idea of how flexible the equipment is in different acoustic conditions.
    
5.  **Compatibility Check**: Ensure that your top choices are compatible with your existing audio system. This could be a deal-breaker if overlooked.
    

#### Making Your Final Choice

1.  **Budget**: Always keep your budget in mind. Is the added performance of a more expensive piece truly worth exceeding your budget?
    
2.  **Longevity vs. Novelty**: Consider how long you expect this equipment to last versus how quickly you expect new, superior models to be released. It may be worth waiting if new models are on the horizon.
    
3.  **Warranty and Return Policy**: Always read the fine print. A favorable warranty or return policy can be the tie-breaker between two close contenders.
    
4.  **Expert and User Reviews**: Sometimes external input can provide a new perspective. Check reviews and seek expert opinions to validate your choice.
    
5.  **Final Audition**: If you’re down to two or three options, consider doing one final audition of these pieces, keeping in mind all the factors you've assessed.
    
6.  **Take the Plunge**: Once you’ve considered all variables, make your purchase. The more thorough your evaluation, the more confident you'll be in your choice.

##  Conclusion

Purchasing hi-fi equipment is a significant investment—not just financially but also in terms of the time and research involved. This guide has aimed to arm you with the necessary tools and knowledge to navigate this complex landscape effectively. From understanding the importance of both in-store and at-home auditions to providing a framework for making your final choice, we hope you feel more confident in your ability to select equipment that will bring you auditory joy for years to come.

#### Summary and Next Steps in Your Hi-Fi Journey

1.  **Continuous Learning**: The world of hi-fi audio is always evolving. Stay updated on the latest trends, technologies, and equipment.
    
2.  **Build Your Network**: Join online forums and social media groups that focus on hi-fi audio to continue learning and share your own experiences.
    
3.  **Maintenance**: Now that you've made your purchase, proper care and maintenance are key to ensuring the longevity of your equipment.
    
4.  **Upgrade Path**: As you enjoy your current setup, consider what your next upgrade will be and start planning for it.
    
Remember, the most critical aspect of your hi-fi journey is your own satisfaction. Your ears are the ultimate judge. Don’t be swayed by brand names or price tags alone; trust your senses and the framework you've created.

mohammad-metri-1oKxSKSOowE-unsplash.jpg

Maximizing Hi-Fi Buying Experience: Auditioning In-Store and At Home

Master the process of choosing the best hi-fi equipment with this in-depth guide. Get valuable insights into evaluating audio gear both in physical stores and at home. This article provides practical advice and a structured approach to help you navigate sales pitches and understand room acoustics, ensuring you make the most informed decision for your audio enjoyment.


Electrocompaniet has recently introduced the AW 300 M Mono Power Amplifier, showcasing its commitment to high-fidelity audio with this latest addition to their lineup. Designed as a mono-only amplifier, the AW 300 M is not just an embodiment of updated, yet unmistakable Electrocompaniet design, but it also offers seamless integration with both current and legacy products from the brand.

**Key Features of the AW 300 M:**

-   **Power and Performance**: The AW 300 M delivers 300 Watts into an 8Ω load, and is capable of producing 600 Watts into a 4Ω load and 1000 Watts into a 2Ω load. This power output is contained within a compact design, showcasing the amplifier's efficiency and adaptability.
-   **Innovative Design**: The amplifier features Electrocompaniet’s direct-coupled high open-loop bandwidth topology, now enhanced with high slew-rate and extended bandwidth amplifier stages. This design allows for an exceptionally low distortion rate, ensuring audio purity.
-   **Advanced Power Supply**: The power supply has undergone significant enhancements, featuring 110,000 uF supply filtering and meticulous DC and RF noise filtering. An 800VA toroidal transformer, combined with upgraded wire gauge transformer and effective shielding, minimizes interference.

**Technical Specifications:**

-   The AW 300 M boasts an input impedance of 330 kΩ and a frequency response ranging from 0.5 – 220 kHz with an active input filter, and 0.5 – 1.1 MHz with the input filter disabled. It offers a voltage gain of 29 dB for mono, balanced input, ensuring precision in audio amplification.
-   The signal-to-noise ratio stands at 95 dB for a 1W/8Ω load and 120 dB for full power output, highlighting the amplifier's clarity and efficiency.
-   The dimensions of the AW 300 M are notably compact for its capability, measuring 212 mm in width, 488 mm in depth, and 292 mm in height, making it an attractive option for various setups.

**Conclusion:** The AW 300 M Mono Power Amplifier, priced at €13,500 per unit in Europe and £12,100 per unit in the UK, represents a significant advancement in Electrocompaniet’s product line. It is designed for audiophiles seeking a powerful, high-quality audio experience in a sleek and modern package. The AW 300 M stands as a testament to Electrocompaniet's expertise in blending innovative audio technology with user-friendly design, offering an unparalleled auditory experience.

electrocompaniet-AW300M-monoblock_poweramplifier_front_view.jpg

electrocompaniet-AW800M-monoblock_poweramplifier_inside_top-view.webp

electrocompaniet-AW300M-monoblock_poweramplifier_inside_view.webp

electrocompaniet-AW300M-monoblock_poweramplifier_rear_view.webp

Electrocompaniet AW 300 M: A New Era of Mono Power Amplification

Electrocompaniet is a prestigious Norwegian brand renowned in the high-fidelity audio market for its exceptional quality audio equipment. Founded in 1973 by Per Abrahamsen and Svein Erik Børja, the company has carved a niche for itself as a manufacturer of high-end audio components, including amplifiers, CD players, and streaming devices. Known for their meticulous attention to detail, Electrocompaniet products are celebrated for their warm, natural sound quality, often described as 'The Norwegian Sound'. The brand has consistently strived to blend technological innovation with traditional craftsmanship, ensuring an unparalleled auditory experience for audiophiles and music enthusiasts worldwide.

Electrocompaniet

Electrocompaniet AW 300 M Mono Power Amplifier, blending high-fidelity performance with compact design. Experience unparalleled audio with innovative topology and advanced power supply

The Electrocompaniet AW 300 M Mono Power Amplifier represents a harmonious blend of high-fidelity audio engineering and sophisticated design. As the latest addition to Electrocompaniet's esteemed lineup of audio equipment, this mono power amplifier is a testament to the brand's dedication to sonic excellence.

Key Features:

Compact Powerhouse: Despite its relatively compact size, the AW 300 M is a robust performer, capable of delivering 300 Watts into an 8Ω load, and scaling up to 600 Watts and 1000 Watts into 4Ω and 2Ω loads, respectively. This makes it a versatile choice for various audio setups.

Innovative Design: Featuring Electrocompaniet's signature direct-coupled high open-loop bandwidth topology, the AW 300 M is enhanced with high slew-rate and extended bandwidth amplifier stages. This design ensures minimal distortion and maintains the purity of the audio signal throughout the amplification process.

Aesthetic Integration: The AW 300 M boasts an updated yet unmistakable Electrocompaniet design, seamlessly complementing both contemporary and legacy Electrocompaniet products. Its sleek appearance not only adds to the visual appeal but also embodies the brand's commitment to combining form with function.

Technical Precision: With an input impedance of 330 kΩ and a frequency response ranging from 0.5 – 220 kHz, the amplifier assures a high degree of audio fidelity. The signal-to-noise ratio stands at 95 dB for a 1W/8Ω load and 120 dB for full power output, highlighting the amplifier's efficiency and clarity.

Enhanced Power Supply: The AW 300 M features a substantially enhanced power supply unit, including 110,000 uF of supply filtering. This meticulous engineering ensures clean and powerful audio delivery, filtering both DC and RF noise effectively.

The Electrocompaniet AW 300 M Mono Power Amplifier, with its combination of power, precision, and elegance, is an exemplary choice for audiophiles seeking an exceptional listening experience. Its design and performance embody the essence of Electrocompaniet's philosophy – delivering natural, high-quality sound in a sophisticated package.

ATOHM Launches Sirocco 2.24: Enhanced Floorstanding Speakers with Superior Sound Quality

Discussion

Other articles

RCA vs Speaker Cables: The Best Choice for Long Runs in Home Audio

Maximizing Hi-Fi Buying Experience: Auditioning In-Store and At Home

Electrocompaniet AW 300 M: A New Era of Mono Power Amplification